Post Installation Cleaning And Maintenance Of Porcelain Floor Tiles
The following maintenance recommendations are based on general cases. If these do not fit the needs required, please contact info@conceptsurfaces.com to find a solution!
Recommendations for a new installation – Products are produced by Fila Solutions. Contact info@conceptsurfaces.com to purchase.
Grout Haze Remover (For cement based grouts): DETERDEK – Acidic Cleaner
Coverage: 1,630 sq ft / GAL
Dilution: 1:5 in water
Materials Needed: DETERDEK, Green scrubbing pad, Microfiber Cloth, Floor Scrubbing Machine.
- Distribute the diluted DETERDEK evenly across the porcelain using a long handled brush or similar applicator
- Scrub the surface with a green scrubbing pad
- Remove any remaining residue with a wet vacuum or a clean microfiber cloth.
- Thoroughly rinse the surface with a synthetic mop. Use one bucket to hold clean water and another bucket to strain dirty mop water.
Grout Haze Remover (For epoxy based grouts): EPOXYOFF – Epoxy Grout Haze Remover
Coverage: up to 100 sq ft / QT
Dilution: full strength
Materials Needed: EPOXYOFF, Green scrubbing pad, Microfiber Cloth, Floor Scrubbing Machine.
- Distribute the undiluted EPOXYOFF evenly across the porcelain using a long handled brush or similar applicator
- Let the product sit on the haze for 30 minutes
- Scrub the surface with a green scrubbing pad and a little water
- Remove any remaining residue with a wet vacuum or a clean microfiber cloth.
- Thoroughly rinse the surface with a synthetic mop.
Routine Maintenance Cleaner: CLEANALL – Ph balanced cleaner
Coverage: 61,115 sq ft / GAL
Dilution: 1:200 in water
Materials Needed: CLEANALL, Synthetic Mop, Long Handled Brush, Floor Washing Machine
- Dilute 1:200 (Capful per gallon)
- Distribute the mixture evenly across the tile using either a synthetic mop, long handled brush, or a floor washing machine
- No rinse is required